Skip to product information
$66.49
INA
Genuine Eaton OEM
Needle Bearings
2 Bearings (1 set)
2004-2009
Fits 4.2 liter Land Rover Jaguar M112 Superchargers
Does not fit the 4.0 liter engines
These bearings are in the rear of the supercharger main housing. Sometimes called the Case Needle bearings. They come pre-greased with the correct Eaton grease.
Original Eaton / OEM
You cannot buy these from your local dealer. They make you buy an entire supercharger.
approximately
ID 17mm, OD 27mm, length 22.2mm
Jaguar M112 Needle Bearing are in a through hole
& are easy to remove and install with a press
No special puller is required on the Jaguar superchargers because
bearings are in a through hole.
We press them out from inside so the caps are not bent. I install new bearings from inside, they are pressed in about 0.055" from the surface, I recommend you measure the old ones before installing. I install the bearing caps from the outside, a little but of loctite is a good idea on the caps if they don't fit tight.